Preparing a quote for a Velux
How to take measurements for a Velux safety frame?
The Velux frame will be fitted inside the home -- not on the roof.
The opening axis of a Velux is located either at the top or in the middle:
- - at the top: the part of the Velux that opens is at the bottom,
- in the middle: the Velux pivots: the lower part then sits outside while the upper part comes into the home.
Here is an illustration to help you take the right measurements.
Is the no-drill frame suitable for every type of Velux?
The no-drill ProtectionChat frame is suitable for windows "between parallel walls": that is, it is held in place by pressure between 2 walls (e.g. left-right). Around 4-5 cm of depth is needed to hold the frame supports in place. If the window recess is "V"-shaped (back-to-front), small wedges must first be fixed so that the frame can be pressure-fitted properly. The dimensions of the window may limit the use of the frames.
Is it possible to choose the colour of the net?
The available nets are:
– fir green reinforced with a steel wire, for frames with a fixed net or a sliding net,
– the transparent net is too fragile: we do not offer this net on our frames.